How can the daily maintenance and maintenance of the laser cutting machine be more stable?

In the course of use, laser cutting machines generally do not have much problem. In order to extend the service life of laser cutting machine equipment, we must pay attention to the daily maintenance and maintenance of the equipment, and pay more attention to some of the above details during the operation of the equipment. The following focuses on six aspects:

Make sure that the circulating water is full before the machine is running. The water quality and water content of the circulating water directly affect the service life of the cabinet. Therefore, the circulating water should be regularly replaced and cleaned. It is best to do it once a week.
Second, the fan is clean.
Long-term use of the fan on the machine will cause a large amount of solid dust to accumulate in the fan, causing the fan to produce a lot of noise, and it is not conducive to exhaust smoke and deodorization. In the case of insufficient suction of the fan, the fan should be cleaned.
Third, the cleaning of the lens.
There are reflective surfaces and focusing mirrors on the fuselage. The laser is reflected by these lenses, focused, and then emitted from the laser head. The lens is easily contaminated with dust or other contaminants, which can cause laser loss or damage to the lens. Therefore, the lenses should be cleaned every day. Pay attention to the following when cleaning: 1. The lens should be lightly coated to prevent damage to the mirror surface; 2. During the cleaning process, it should be handled gently to prevent it from falling; 3. When installing the focusing lens, be sure to keep it sunken.
Fourth, guide rail cleaning.
As one of the core components of the equipment, guide rails and linear shafts play a guiding and supporting role. In order to ensure the machining accuracy of the machine tool, the guide rail and the straight line of the machine tool are required to have high guiding accuracy and stable movement. Due to the large amount of hydrogen sulfide dust and smoke generated during the processing of the processed parts, a large amount of hydrogen sulfide dust and smoke will be deposited on the surface of the guide rail and linear shaft for a long time, which seriously affects the processing accuracy of the equipment and forms corrosion points on the surface of the linear shaft of the guide rail. Shorten the service life of the equipment. Therefore, the machine guide rails are cleaned every half a month. Shut down before cleaning.
5. Fastening and connection of connecting parts
After working for a period of time, the screws and couplings of the kinematic joints will loosen, which will affect the smoothness of the mechanical movement. Therefore, during the operation of the machine, pay attention to whether there are abnormal noises or abnormal phenomena in the transmission parts. If problems are found, they must be reinforced and strengthened in time. service. At the same time, the machine should use tools to tighten the screws again and again. The equipment will be used firmly for about a month for the first time.
Sixth, check the light path.
The optical path system is jointly completed by the focusing mirror and the reflecting mirror. There is no problem of offset of the focusing mirror in the optical path, but the three reflecting mirrors are fixed by mechanical parts, and the possibility of offset is relatively large, although in general, there will be no offset. , But it is still recommended that the user must check whether the light path is normal before each work.

Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *