When it comes to fiber laser Cutting Machine, many people’s first impression is that it is accurate, fast and efficient. Then in the process of using fiber Laser Cutting machine often appear many problems, such as errors in the process of laser cutting, laser cutting out of the finished product effect is not good, etc.. Many people do not particularly understand this, these errors are how to produce it? The following will follow GOLD MARK together with a look at it.1.the geometric error of the workpieceDue to various reasons, the processing object surface undulation, and in the cutting process, will produce heat, so the surface of the thin plate parts are easy to deformation, and due to the surface is not flat, will also produce the laser focus and the surface of the object being processed and the ideal position of the position of random change.2.the cutting thickness of the material exceeds the standardCutting material thickness exceeds the standard. To 3000W for example: the laser cutting machine can cut the thickness of the plate below 20 thickness, the thinner the plate, the easier it is to cut, the better the quality. If the plate is too thick, the laser cutting machine cutting up more effort to ensure that the cut off, processing accuracy There will be errors, so to determine the thickness of the plate factor.3.the error generated by programmingIn the processing of fiber laser cutting machine, complex surfaces on the processing trajectory is fitted by straight lines, arcs, etc., these fitted curves and the actual curve there are errors, these errors make the actual focus and processing object surface relative position and the ideal programming position error. Some of the programming systems can also introduce some deviations.4. Focal point position errors in the laser cutting processIn the cutting process of fibre laser cutting machines, the relative position between the focal point and the surface of the object to be processed changes due to many factors, and the smoothness of the surface of the processed product is also related to the way the workpiece is clamped, the geometric error of the machine tool and the long time load of the machine will be deformed, the thermal deformation of the workpiece in the process will cause the laser focal point position and the ideal given position (programmed position) deviation.These random errors cannot be avoided and can only be reduced by online inspection and control, thus improving the accuracy of the fibre laser cutting machine.
Guangdong China cut CNC Machinery Co., Ltd. is a high-tech industry enterprise specialized in researching, manufacturing and selling the machines as follows: Laser Engraver, Fiber Laser Marking Machine, CNC Router. The products have been widely used in advertisement board, crafts and molding, architecture, seal, label, woodcutting and engraving, stonework decoration, leather cutting, garment industries, and so on. On the base of absorbing the international advanced technology, we provide the clients the most advanced production and perfect after-sale service. In recently years, our products have been sold not only in China, but also as far as Southeast Asia, Middle east, Europe, South America and other overseas Markets.Email: [email protected]
Link to this article：Why errors occur during the use of fibre laser cutting machines
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cut Wiki，Thanks!^^