Automatic feeding requirements of plate rolling machine
The plate rolling machine is a kind of equipment that uses work rolls to bend the sheet metal. The following is an introduction to the automatic feeding requirements of this equipment, let’s take a look:
(1) Automatic center alignment.
The roll forming of the plate is mainly completed by the rollers of the plate bending machine. When the plate enters the equipment, it is necessary to ensure that the front edge of the plate is in contact with the outer circumference of the roller at the same time, so that the rolled parts have high precision and high quality. The automatic center alignment operation of the automatic feeding equipment is mainly completed by the center alignment rod driven by the servo motor. Then the pushing device pushes the plate to the feeding place of the plate rolling machine, and waits for the plate to be rolled.
Taking into account the particularity of the shape of the sheet, the vacuum suction cup picking device is mainly used for sheet transportation. The plate rolling machine can roll plates of different specifications and sizes. Therefore, the position of the suction cup in the vacuum suction cup pickup device of the automatic feeding equipment needs to have an appropriate adjustment function to be suitable for the handling of plates of various specifications and sizes.
(3) The speed and stability of the handling process.
In order to meet the working rhythm and the safety of the handling process, the automatic feeding of the plate handling process must have better speed and stability to prevent overshoot and vibration during the handling process.
The above is about the automatic feeding requirements of the bending machine. In order to make the equipment function better, regular maintenance should be carried out. I hope that the above content can be helpful to everyone.
Link to this article：Automatic feeding requirements of plate rolling machine
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Stamping Wiki，Thanks